Custom Loading Ramps
Call us today with your loading ramp idea. We love to be challenged.
If you are looking for a portable loading ramp that meets your exact specifications but cannot find the perfect fit off the shelf, we will work closely with you to design and build a custom loading ramp that suits your facility perfectly. All of our custom portable loading docks are engineered to meet the needs of clients working across a wide range of industries throughout North America. Whatever you need in a loading dock, our team of highly trained staff and our in-house manufacturing facility have the resources and capabilities to build any type of ramp you require.
How Our Custom Ramp Design Process Works
We built our process so a custom ramp feels as straightforward to order as one of our stock models. Here is what happens after you call:
- We listen to the problem you are solving:
Every custom project starts with a conversation about what is not working with your current setup, whether that is a trailer height mismatch, a tight yard, an unusual piece of equipment, or a dock that was never built for the loads you are moving today.
- We take your specs:
We confirm the dimensions, weight capacity, and site conditions that matter: the widest piece of equipment crossing the ramp, the trailer or dock heights you need to bridge, and any grade, surface, or clearance restrictions in your yard.
- Our engineers design and model the ramp:
We use 3D modeling to build a complete rendering of your ramp before anything is cut, so you can review the design and confirm fit and function ahead of manufacturing. Every design is built with a safety factor of at least 2 to 1 and run through stress simulations under worst-case loading conditions.
- We fabricate in-house:
Once you approve the design, our team builds it from 100% welded steel construction at our own facility, so there is no handoff to a third-party shop and no guessing about quality control.
- We ship it to your site:
Your custom ramp arrives ready to put to work, with our team available if you have questions about setup or use.
Getting Your Specifications Right
The details you bring to that first call make a real difference in how well your ramp performs once it is in your yard. A few of the specifications we work through together:
- Weight capacity: Your ramp needs to carry the combined weight of the equipment crossing it and the heaviest load that equipment will carry, not just the load alone. We size capacity around your actual forklift or vehicle weight plus your heaviest pallet or unit, not a generic average.
- Width: The usable surface needs to be wider than the widest equipment that will use it. If your fleet includes an oversized forklift or a specialty cart, we build the ramp around that piece of equipment rather than a standard width.
- Length and slope: A longer ramp produces a gentler incline, which reduces strain on equipment and operators and makes for safer, smoother crossings. We help you find the length that fits your site footprint while keeping the grade manageable for your equipment.
- Site conditions: Uneven ground, tight yard space, or the need to move the ramp between locations all shape the final design, from the base configuration to the mobility features we build in.
Industries We Build Custom Ramps For
Since no two facilities load and unload the same way, we build custom ramps for clients across a wide range of sectors, including:
- Warehousing and logistics operations that need to turn an outdoor staging area into a working loading zone without pouring a permanent dock.
- Manufacturing plants moving inventory just in time, where a ramp needs to adjust to varying trailer heights throughout the day.
- Agricultural and rural operations, including grain elevators and distribution points, where no dock infrastructure exists at all and a ramp has to do the whole job.
- Construction and equipment rental sites that need a ramp built for a specific piece of heavy equipment rather than general-purpose foot and forklift traffic.
- Shipping, food processing, and specialty facilities with unusual dimension, capacity, or surface requirements that a stock ramp will not satisfy.
If your operation does not fit neatly into one of these categories, that is exactly the kind of project we like to hear about. Call us with the details and we will tell you honestly whether a custom build is the right fit or whether one of our stock ramps will do the job just as well.
Lead Times and What to Expect
We manufacture from stock inventory whenever we can, which lets us turn around most custom loading ramps in approximately one to two weeks from design approval. More complex builds, unusual dimensions, or heavier capacity requirements can extend that timeline, and we will give you a firm estimate once your specifications are locked in. There is no project too small or too specialized to bring to us. Call us or request a quote and we will scope your build and give you a realistic delivery date up front.
Frequently Asked Questions
How long does it take to build a custom ramp?
Most custom ramps ship within approximately one to two weeks of design approval, since we manufacture in-house and keep material on hand. More complex or oversized builds take longer, and we will confirm your timeline as soon as we have your final specifications.
What is the minimum order for a custom ramp?
We build custom ramps for single-unit orders as well as larger fleet requirements. There is no minimum order size that rules a project in or out; call us with your specifications and we will scope it from there.
Do you build ramps for equipment other than forklifts?
Yes. Our custom builds cover forklift traffic, foot traffic, specialty carts, and other material handling equipment. Tell us what will be crossing the ramp and we will size out the width, capacity, and surface to match.
Can you match an unusual trailer or dock height?
Yes. Height mismatches between trailers, docks, and yards are one of the most common reasons clients come to us for a custom build rather than a stock ramp. We design the ramp around your actual measurements.
Do you handle the engineering, or do I need to provide drawings?
Our engineers handle the design and modeling in-house using 3D rendering, so you do not need to arrive with drawings. You bring the problem and the site details, and we bring the engineering.
Is a custom ramp built to the same safety standards as your stock ramps?
Yes. Every custom ramp we build carries the same safety factor and stress testing standards as our stock line, so you are not trading safety for a tailored fit.
What if I am not sure whether I need a custom ramp or a stock model?
Call us and describe what you are trying to solve. We will tell you plainly whether a stock ramp meets your needs or whether a custom build is worth the investment, rather than steering you toward the more expensive option by default.
Latest Custom Loading Ramps
Ground-to-Dock Ramps vs. Permanent Loading Docks
At Dura-Ramp, we have decades of experience as a trusted North American manufacturer of ground-to-dock loading ramps, and we know that the comparison between ground-to-dock ramps and permanent loading docks is a capital investment decision that affects operational flexibility, construction timelines, and long-term facility costs. The Real Cost of Permanent Dock Construction Permanent loading docks ...READ MORE
How Ramp Capacity Ratings Are Determined
At Dura-Ramp, understanding how ramp capacity ratings are determined is fundamental to how we design and manufacture every product. Every rating reflects a disciplined engineering process built on material science, structural analysis, and real-world application requirements. Follow these load testing procedures for ensuring ramp safety. Materials and Construction Method Capacity begins with what the ramp ...READ MORE
Loading Ramp Solutions for Rural Operations
Rural facilities operate under conditions that standard loading infrastructure simply wasn’t designed to handle. At Dura-Ramp, we’ve built loading ramp solutions for rural operations that eliminate the bottlenecks created by absent or inadequate dock infrastructure. Whether the facility is an agricultural distribution point, a grain elevator, or a remote manufacturing plant, portable and custom-engineered ramps ...READ MORE
Loading Ramp Modifications for Hazardous Material Handling
When your facility handles flammable liquids, corrosive chemicals, or other dangerous goods regulated under U.S. DOT requirements (49 CFR Part 177) or Canada’s Transportation of Dangerous Goods (TDG) regulations, loading ramp modifications for hazardous material handling become critical infrastructure decisions rather than simple equipment choices. At Dura-Ramp, we understand that operations involving HAZMAT require loading ...READ MORE
Understanding Ramp Slope Angles
Choosing the right loading ramp slope angle is essential for safe, reliable loading and unloading operations in warehouses and industrial facilities. The slope angle you select affects how easily equipment moves, how safe workers are during use, and how well the ramp performs over time. At Dura-Ramp, we know how important it is to balance ...READ MORE
